Mapper V3 (1180MM)

With 2X 3700mah 4S Lipos, the Mapper V3 can fly upto 40 minutes and covers nearly 40Km in cruise flght. Can carry a downwards facing HD Camera for Photomapping applications.

Features:
  Spacious Electronics bay
 Flies for 40 minutes. Covers upto 40Kms
  Shipped within wing cores
  Precision CNC Hot Wire Cut
  Precision Laser Cut Parts
  Almost unbreakable wings

Specifications

  • WingSpan: 1180MM
  • All-Up-Weight: ~ 1200 gms
  • CG Location: 170 MM back from Main Wing Panel Tip.

Building Tools:

  • Hot Glue Gun and Glue Sticks
  • Cyanoacrylate Glue ( FeviKwik etc )
  • Screwdrivers & Allen Key
  • Paper Tape & Clear Packing Tape
  • An Iron ( For Laminating )
  • Soldering Iron and Solder Wire
  • Ruler , Pen and a Flat Working Table

Recommended Equipment:

  • 4-6 Channel Programmable Radio (Tx-Rx)
  • 2 X 3300 mah 4S Lipo
  • 40 Amp Brushless ESC
  • 2 Nos 9gms Servo ( Metal Gear Recommended)
  • Brushless Motor 1200-1500KV ( > 250Watt)
  • (Min Thrust 1000gms)
  • 8-9 inch Propellor
  • Autopilot & FPV Equipment ( Optional )

Performance Specifications

  • Flight Time : Upto 40 Minutes.
  • Flight Length : Upto 40 Kilometers
  • Speed: 65km/hr Cruise. Min: 45km/hr Max: 110km/hr
  • Altitude: Upto 10,000ft ASL
  • Total Camera Payload Wt: Upto 200Gms

Whats Included :

  • 2 EPP Wing Panels in Wing Beds, 1 EPP Center Bay
  • 2MM Laser Cut Aeroply sheet
  • (Motor Mount & Battery Bay)
  • 1000mm mm 5x1MM Carbon Fiber Strip
  • 500 mm 5x1MM Carbon Fiber Strip
  • Corrugated Plastic 3MM Winglets ( 2Nos )
  • Spare Corrugated Plastic 3MM Winglets (2Nos )
  • Corrugated Plastic 3MM Nose Skids ( 4Nos )
  • Corrugated Plastic 3MM Hatch
  • 1.5ft x 12ft 3 Mil Lamination Film.
  • 2 Nos ~150mm Pushrods
  • 2 Nos Linkage Connectors
  • Nylon Control Horn w/ backplate ( 2 Sets)
  • M2 15MM Philips head Screw ( 6 Pcs )
  • Ziptie ~ 250 mm ( 2 Pcs )
  • 1 Bamboo Skewer, Paper Knife
  • 14 degrees Elevon Throw Gauge
  • Instructional Manual
Videos:
Kit Includes:
Image Gallery: