Interceptor – 160 Beta (Pre-Release)

10,000.0012,500.00

Offers Ultra fast, jet-like performance in a 1000mm EPP Forward swept design that looks great in the air.

Clear

Features

Unique Forward Swept Wing Design
Built for Long endurance FPV
Large Battery Bay
Takes DSLR for downward photos
Easily to Hand launch
Carbon Spars & Balsa Elevon’s

Specifications :

  • WingSpan: 1645MM
  • All-Up-Weight: 2500 gms
  • CG Location: 20 MM back from mid panel & side panel join of wing.

Recommended Equipment:

  • 4-6 Channel Programmable Radio (Tx-Rx)
  • 8000-12000 mah 4S Lipo
  • 70-90 Amp Brushless ESC
  • 2 Nos Servo (Metal gear recommended) Min Torque 4kg-cm
  • Brushless Motor 900-1200KV Min 700Watts.
  • 9-11 inch Propellor
  • FPV Equipment ( Optional )
  • Autopilot Equipment ( Optional )

Building Tools:

  • Hot Glue Gun and Glue Sticks
  • Cyanoacrylate Glue ( FeviKwik etc )
  • Gorilla Glue
  • Screwdrivers & Allen Key
  • Clear Packing Tape
  • An Iron ( For laminating )
  • Soldering Iron and Solder Wire
  • Ruler , Pen and a Flat Working Table

Whats Included :

       EPP Foam Part’s

  • 2 Main EPP Wing Panels in Wing Beds
  • 2 Shoulder EPP Wing Panels in Wing Beds
  • 1 Center Fuselage EPP Wing Panel
    Aeroply Part’s
  • 3MM Laser Cut Aeroply Motor Mount
  • 3MM Laser Cut Aeroply Battery Tray
  • 2MM Laser Cut Aeroply Wing Strap retainers ( 4Pcs )
    Carbon Fiber Part’s
  • 12x10MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
  • 10x6MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
  • 10x8MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
  • 8x4MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
  • 2 Pcs 10x8MM 40Cm Length Roll Wrapped Carbon Fiber Spar
    Corrugated plastic Part’s
  • Corrugated plastic Winglets (2 pcs)
  • Corrugated plastic Fuselage Cover
  • Corrugated plastic Winglets
    Lamination Roll
  • 1.5ft x 15ft 3 Mil Lamination Film.
    Battery Strap’s
  • 220MM Non-Slip Battery Straps for wing (2Pcs)
  • Non Slip Main Battery Strap 300mm
    Alphaboard Part’s
  • Root Jigs 4 Pcs Alphaboard
  • Tip Jigs 4 Pcs Alphaboard
  • 14 degree Elevon Throw Gauge
    Elevon Part’s
  • 36″ Balsa Elevon
  • 2 sets 95 Threaded Steel Pushrods with 2 Steel Clevis ( and nuts )
  • 2 Sets Nylon Control Horns with 2 screws each.
Kit Includes:


Videos:
Image Gallery: