SPEC RACER 900mm

2,699.005,399.00

With its Fully symmetrical wing, the Spec Racer flies like a rocket. The moment it leaves your hands, Fly it straight, Fly it inverted, Do all the aerobatics and this surely gives some adrenaline rush !.

Clear

Features

  Built for FPV Racing
  Easily does over 100km/hr
  Shipped within wing cores
  Precision CNC Hot Wire Cut
  Precision Laser Cut Parts
  Almost unbreakable wings

Specifications :

  • WingSpan: 600MM
  • All-Up-Weight: ~500 gms
  • CG Location: 7 inches back from Nose Tip.

Recommended Equipment:

  • 4-6 Channel Programmable Radio (Tx-Rx)
  • 2200 mah 3S Lipo
  • 30Amp Brushless ESC
  • 2 Nos 9gms Servo
  • Brushless Motor 1500KV or higher (2200kv suggested)
  • 6-8 inch Propellor

Whats Included :

  • 2 EPP Wing Panels
  • Laser Cut Aeroply sheet
  • ~750 mm 5x1MM CF Strip
  • ~250 mm 5x1MM CF Strip
  • 2 Nos ~330mm 3x1MM CF Strips
  • Corrugated Plastic 3MM Winglets ( 2Nos )
  • 1ftx6ft 3 Mil Lamination Film.
  • 2 Nos ~120mm Pushrods
  • 2 Nos Linkage Connectors
  • Battery Strap, Paper Knife
  • Elevon Throw Gauge
  • Instructional Manual
  • Balsa Elevons Package (Optional)
  • 2 Nos. 450 MM (18″) long Balsa Elevons
  • 2 Nos. 75 MM long Threaded push rod.
  • 4 Nos. Steel Clevises
  • 2 Nos. Nylon control horns with back plate.
  • 4 Nos. M2 x 15mm Philips head bolts
  • Electronics Package (Optional) includes.
  • 2 Nos. 9 gm Metal Gear Servos
  • 1 Nos. 30Amp Brushless ESC (Speed controller)
  • 1 Nos. A2212/10T 1400KV Brushless Motor
  • 1 Nos. 9×5 Propellor
  • 2 Nos 15cm Servo Extension wire
Kit Includes:

Balsa Elevons Package (Optional)

Electronics Package (Optional)

Build Videos

Image Gallery