Viggen
₹2,499.00 – ₹5,699.00
The Viggen is a scale model based off the Swedish Saab Viggen Jet. It can be build both with an EDF or with a conventional motor / power pack. The high-alpha low passes just make this one addictive plane to fly. It can be a great EDF trainer as it can fly quite slow without breaking out into a stall. Add in the Thrust vectoring set and this becomes a beast that can do some unbelievable maneuvers. The build is a little intermediate, but pretty simple if instructions are followed closely.
- Description
- Additional information
Description
FT- VIGGEN
The Viggen is a scale model based off the Swedish Saab Viggen Jet. It can be build both with an EDF or with a conventional motor / power pack. The high-alpha low passes just make this one addictive plane to fly. It can be a great EDF trainer as it can fly quite slow without breaking out into a stall. Add in the Thrust vectoring set and this becomes a beast that can do some unbelievable maneuvers. The build is a little intermediate, but pretty simple if instructions are followed closely. The FT Viggen can be flown on either an EDF or a propeller setup. All the way from a light 24 gram motor setup (440 grams flying weight), up to a 70mm EDF with a 4S 3000mAh (880 grams flying weight).
SPECIFICATIONS
- Weight Without battery: 600gms
- Wingspan: 25.5 inches (700mm)
- CG Location: 5.25in/133mm from Leading edge of rudder
- Control Throws: Elevons: 90 – 120 EXPO: 400
RECOMMENDED EQUIPMENT
- EDF: 1000-1200 Watts.
- Minimum thrust 1100gms.
- ESC: 75-90Amps
- Motor: 2300kv-2800kv Motor
- ESC: 40-60 amps
- Battery: 2200-3300 mAH 4s
- Servos: (2) 9 gram servos
- For Thrust Vectoring Use Metal gear servos.
WHATS INCLUDED IN THE KIT
- Fliteboard Pro (4 Nos)
- Aeroply Parts
- Thrust Vectoring Mount
- FT-Elements Firewall
- Control Horns (2)
- Pushrods (4pcs) 10cmx2, 40cmx2
- Pushrod Connectors (2)
- Velcro
- Wire Set for Thrust Vectoring (3Pcs)
- Pushrod Guide Tube (2)
- Posterboard Exhaust Tube
- Paper knife
- Decals
- Data Sheet
Laser Cut Fliteboard Pro Right Wing
Laser Cut FliteBoard Pro Left Wing
Laser Cut Flite Board Sheet
Kit Options - Electronics
Optional Electronics Pack Includes :
- DYS 2826 1400kv Brushless Outrunner Motor
- 30A Electronic Speed Controller
- 3 Nos. TowerPro 9Gm Metal Gear Servos
- 3X 30cm Servo Extension Cable
- 0.5 Meter Red (32 Strands/0.2mm Tinned copper ) Silicone Wire.
- 0.5 Meter Black (32 Strands/0.2mm Tinned copper ) Silicone Wire.
- Propellor: 8×4.7
- 1 Male XT60 Connector
- 4MM Heatshrink Tube Piece Red
- 4MM Heatshrink Tube Piece Black
BUILD VIDEO
Packaging & Shippng
All our kits are securely packaged to ensure they reach you safely. Lasercut Sheets are first shrink wrapped, small parts are sealed in plastic bags, and then the entire kit is bubble wrapped, before being put in a custom made 5-ply corrugated Box.
Shrink Wrapped for Protection
Bubble Wrapped for Further Protection
Shipped in Strong Corrugated box
All Kits are shipped via India Post. This is because, Private couriers charge based on Volumetric Pricing, which is often very expensive. We stand by our kits and guarantee that in case of any major damages during transit, or any manufacturing defects , we shall gladly help arrange replacements.
IndiaPost Service is a Trackable service, and we provide tracking details, usually within 1 working day.
The FT-Viggen Can be flown both with an EDF as well as a traditional motor. With the EDF, its an unbelievable experience. Can fly Slow as well as fast, and looks great in the air.
Additional information
| Weight | 3.2 kg |
|---|---|
| Power Pack | No Power Pack, Viggen Power Pack |
